More on DNSer. I switched to a Netgear MR314 for 8…

More on DNSer. I switched to a Netgear MR314 for 802.11b access, and this router wasn’t listed either. Here’s the info needed for the MR314, if you have one too.

;----------------------------------------------------------------------------;
;This is a template for Netgear MR314 Router, Firmware  V3.29(CF.0)b1 | 6/19/2002
;Contributed by Bill Talcott
;If your router's LAN IP isn't 192.168.0.1 you should change it accordingly:

[Source]
Interval=55
URL=http://192.168.0.1/mtenSysStatus.html
URL1=http://192.168.0.1/mtenSysStatus.html
User=admin
Pass=secret
Prefix=IP Address :                                                   <B>
Count=1
Log=1
;File=mr314temp.html
;----------------------------------------------------------------------------;

That should pretty much do it. You need to specify the first URL to establish a session, and the second one to actually get the status page.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Note: This post is over 5 years old. You may want to check later in this blog to see if there is new information relevant to your comment.